Wicked EDF Extreme Motor 5400KV

Product Information

Working with my suppliers we were able to come up with a great EDF motor for use in the EDF models. Other motors need 4S lipos to get the performance we get on only 3S!  Specially designed so that you do not have to buy a 4S lipo or expensive Jeti Spin controllers. This motor works great with a DonsRC Pentium 40 amp ESC and you will be very happy with the great speed and performance you will get out of your EDF model.

Specifications:
Weight (as shown in photo): 67 grams
KV: 5200-5400 rpm/volt
ESC Timing: Low for Pentium Series ESCs (higher timing does not increase RPM only amp draw)

Awesome performance on 3S in the Alfa fan with a 5 blade rotor. Recommended lipo is any 20C(or greater) 3S 2200 mah.

Here is some test data:

*This motor can not be used with 4S lipo in the Alfa fan with 5 blades, SF Fan, Wattage Fan,  Hyperflow,  or GWS fans on 4S lipo. The amp draw will burn up the motor!  4S lipo is ONLY for XF fan and 3 bladed Alfa fan. 

Great motor upgrade for the stock fan unit in the Phase 3 Hobby People F-16.

Note: All testing was performed at approx 74F temp with ThunderPower Extreme 3S 2200mah and 4S 2200 mah V2 lipos. Data was collected using an Eagletree Micro Logger in "Live" mode. A DonsRC Pentium 40 ESC was used set to "Low" timing. Motors were mounted in the Afla EDF housing but no inlet or outlet ducting was attached. Your actual RPM and amp draw will vary with ESC, lipo, ducting, exit nozzle sizes, and actual motor KV value. The number posted here are representative of the "typical' motor and I have done my best to try and give you the most accurate test data I can so you can make an educated and informed decision.   

 

Want a motor a that is also good for 3S and 4S lipo?
Try the regular Wicked EDF 

Please note the motor options when ordering below:

Motor with standoff adapter and EDO rotor plug:  For use in the 64mm EDO 5 blade fans units as in the Hobby Lobby F-18, Mirage, and  Raidentech F-15 jets. The 5 blade rotor in these planes mounts directly onto the included rotor adapter!  For 3S only but will suck some serious amps in the EDO fan!

Motor with standoff adapter and Alfa rotor plug:  For use with  the Alfa line of EDF jet models. 4S performance but only needs a 3S lipo. Keeps your Alfa model light for landing and takeoff,  but you can still punch the throttle to satisfy your speed needs!  

WARNING: Do not use any Wicked EDF motors with Electrifly or Suppo brushless ESCs, they can not handle the the high rpm of a 6 pole outrunner and will fry the ESC and motor. The Hobbywing Pentium brand of ESCs are the only recommended ESC for all Wicked EDF motors. If using any other brand please contact the ESC manufacturer to get the rpm limitation of the ESC with a 6 pole outrunner motor.  If you are unsure of the ESC you have then please email DonsRC before you try as DonsRC can not be held responsible for burned out motors which are damaged due to lower quality brushless ESCs.  

Price: $60.00 $35.00

• Tell a Friend